shielded power inductors C lps4414 document 548-1 document 548-1 revised 08/24/15 dcr srf i sat (a) 5 i rms (a) 6 inductance 2 max 3 typ 4 10% 20% 30% 20c 40c part number 1 20% (h) (ohms) (mhz) drop drop drop rise rise lps4414-301mr_ 0.30 0.040 470 5.6 5.7 5.8 2.35 3.25 lps4414-501mr_ 0.50 0.050 330 4.3 4.4 4.5 2.10 2.80 lps4414-701mr_ this part number has been changed to lps4414-801. lps4414-801mr_ 0.80 0.055 225 3.7 3.75 3.8 1.85 2.50 lps4414-102mr_ 1.0 0.060 190 3.0 3.1 3.2 1.75 2.30 lps4414-152mr_ 1.5 0.078 150 2.9 3.1 3.2 1.55 2.00 lps4414-182mr_ 1.8 0.087 130 2.7 2.8 2.9 1.50 1.90 lps4414-222mr_ 2.2 0.110 115 2.2 2.3 2.35 1.25 1.60 LPS4414-332MR_ 3.3 0.165 85.0 1.8 1.9 1.95 1.15 1.50 lps4414-472mr_ 4.7 0.215 68.0 1.4 1.5 1.55 0.90 1.20 lps4414-562mr_ 5.6 0.260 58.0 1.4 1.4 1.5 0.75 1.10 lps4414-682mr_ 6.8 0.270 54.0 1.2 1.3 1.4 0.70 1.00 lps4414-822mr_ 8.2 0.350 50.0 1.1 1.3 1.3 0.70 0.98 lps4414-103mr_ 10 0.380 43.0 1.1 1.2 1.3 0.70 0.95 lps4414-123mr_ 12 0.380 38.0 0.94 0.97 1.0 0.66 0.88 lps4414-153mr_ 15 0.440 36.0 0.85 0.89 0.92 0.63 0.82 lps4414-183mr_ 18 0.530 31.0 0.76 0.80 0.82 0.56 0.75 lps4414-223mr_ 22 0.590 27.0 0.69 0.72 0.74 0.53 0.68 lps4414-333mr_ 33 0.715 23.0 0.47 0.49 0.51 0.49 0.65 lps4414-473mr_ 47 0.935 18.0 0.39 0.42 0.43 0.44 0.58 lps4414-563mr_ 56 1.15 16.0 0.37 0.39 0.40 0.42 0.54 lps4414-683mr_ 68 1.35 14.6 0.32 0.33 0.34 0.36 0.48 lps4414-104mr_ 100 1.90 11.0 0.26 0.28 0.285 0.31 0.40 lps4414-124mr_ 120 2.60 10.0 0.23 0.24 0.25 0.27 0.34 lps4414-154mr_ 150 3.10 9.0 0.22 0.23 0.24 0.24 0.32 lps4414-224mr_ 220 4.10 6.7 0.18 0.20 0.20 0.22 0.29 lps4414-334mr_ 330 6.00 5.6 0.14 0.16 0.165 0.17 0.23 lps4414-474mr_ 470 9.50 4.3 0.13 0.14 0.145 0.14 0.23 lps4414-564mr_ 560 10.7 4.0 0.12 0.13 0.14 0.13 0.17 lps4414-684mr_ 680 11.7 3.5 0.10 0.11 0.12 0.13 0.17 lps4414-824mr_ 820 15.1 3.0 0.10 0.105 0.11 0.11 0.14 lps4414-105mr_ 1000 16.3 2.6 0.10 0.102 0.106 0.10 0.13 designers kit c340 contains 3 of each values core material ferrite core and winding loss see www.coilcraft.com/coreloss environmental rohs compliant, halogen free terminations rohs compliant matte tin over nickel over silver. other terminations available at additional cost. weight 82.3 C 89.8 mg ambient temperature C40c to +85c with (40c rise) i rms current. maximum part temperature +125c (ambient + temp rise). derating . storage temperature component: C40c to +125c. tape and reel packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 1000/7 reel; 3500/13 reel plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth recommended pick and place nozzle: od: 4.5 mm; id: 2 mm pcb washing tested to mil-std-202 method 215 plus an additional aqueous wash. see doc787_pcb_washing.pdf . ? very low dcr; excellent current handling ? 4.4 4.4 mm footprint; only 1.4 mm tall 1. please specify termination and packaging codes: lps4414-223m rc termination: r = rohs compliant matte tin over nickel over silver. special order, added cost: q = rohs tin-silver-copper (95.5/4/0.5) or p = non-rohs tin-lead (63/37). packaging: c = 7 machine-ready reel. eia-481 embossed plastic tape (1000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d = 13 machine-ready reel. eia-481 embossed plastic tape. factory order only, not stocked (3500 parts per full reel). 2. inductance tested at 100 khz, 0.1 vrms, 0 adc. 3. dcr measured on a micro-ohmmeter. 4. srf measured using agilent/hp 8753es or equiva - lent. 5. dc current at which the inductance drops the specifed amount from its value without current. click for tempera - ture derating information . 6. current that causes the specifed temperature rise from 25c ambient. this information is for reference only and does not represent absolute maximum rat - ings. click for temperature derating information . 7. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering.
shielded power inductors C lps4414 series document 548-2 typical l vs current 0. 1 1 10 1000 100 0.01 0.1 11 0 current (a) inductance (h) 1 h 10 h 3.3 h 33 h 330 h 100 h typical l vs frequency 0. 1 1 10 1000 100 0.01 0.1 11 0 frequency (mhz) inductance (h) 1 h 10 h 3.3 h 33 h 330 h 100 h document 548-2 revised 08/24/15 dimensions are in inches mm dimensions are of the case not including the termination. for maximum overall dimensions including the termination, add 0.005 i n/0,13 mm. for optional tin-lead and tin-silver-copper terminations, dimensions are for the mounted part. dimensions before mounting can be an additional 0.005 inc h/0,13 mm). * 0.169 0.004 4,30 0,10 0.169 0.004 4,30 0,10 0.059 1,50 winding direction dash number 0.0551 1,40 max internal code xxx x 0.185 4,70 0.118 3,00 0.128 3,25 0.059 1,50 0.185 4,70 0.055 1,40 recommended land pattern 0.118 3,00 0.124 3,15 0.030 0,75 typ typ 0.030 0,75 * * * packaging 1000/7 f reel; 3500/13 f reel plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth ote ew part orietatio parts are rotated 90 in the packaging tape compared to previous versions of this product. new old 123 123 123 123 123 123
|
